News

LED Display Technical Parameters

Indoor screen series

The indoor screen area is generally less than a dozen square meters, and the dot density is high. It is used in non-direct sunlight or lighting environments, and the viewing distance is a few meters away. The screen does not have the ability to seal and waterproof. According to the control method and display color, it can be divided into the following types:

● Indoor full color video screen

  ★ Use independently developed point-by-point correction technology to ensure uniformity between points.

  ★ The light-emitting point of the display panel adopts a columnar flat-head light-emitting diode. After testing,

  　 Both vertical and horizontal viewing angles can reach 150 degrees.

  ★ The reflector that constitutes the light board is made by opening the mold, and it is seamlessly matched with the luminous point, and the finished product can be

  　 The surface height error is extremely small.

  ★Using light-emitting diodes, the light-emitting brightness is 6-8 times that of the light-emitting chip.

  ★ The heat of the light-emitting diode is mainly dissipated from the metal pins, which determines the display panel

  　 Has good heat dissipation performance.

  ★ Bad LEDs can be replaced one by one without affecting the use of other LEDs.

  　 Reduce maintenance costs.

  ★ Using the latest technological level of video control system, the display color is bright and clear.

  ★ Main technical parameters

  Primary color　RGB (full color) Pixel diameter〔mm〕 5.00 8.00 String 5

  Pixel pitch〔mm〕　7.62 10.00

  Pixel composition 　1R1G1B　2R1G1B virtual pixel

  Unit panel points [dot] 　32×32　 32×16

  Unit panel size〔mm〕 245×245　320×160

  Unit panel weight〔g〕　1100　　　850

  Physical pixel density〔dot/m2〕17200　10000

  Virtual pixel density〔dot/m2〕16384　 40000

  Peak power consumption〔W/m2〕　　850　　750

  Average power consumption〔W/m2〕　　 350　　 320

  Weight〔Kg/m2〕　　　 <36　　 <36

  Horizontal viewing angle　　　　 150°

  Vertical viewing angle　　　　 150°

  Maximum brightness〔cd/m2〕　　1700　　800

● Indoor dual-color video screen

  ★ The display module adopts the products of major manufacturers, and the brightness and luminous consistency of the whole screen are good.

  ★ The system is stable and mature, the installation is simple without debugging, and the failure rate is extremely low.

  ★ Using the latest technological level of video control system, the display color is bright and clear.

  ★ Main technical parameters

  Primary color 　RG (red and green double primary colors)

  Pixel diameter〔mm〕　　3.75　　　　　 5.00

  Pixel pitch〔mm〕　　4.75　　　　　 7.62

  Pixel composition　　　　　1R1G　　　　　 1R1G

  Unit panel points 　 64×32 (or 80×32) 80×32

  Unit panel size (mm)

  　　　　　　　306×153 (or 382×153)

  　　　　　　　　　　　　　　　　 612×245

  Unit panel weight〔g〕800　　　　　　　1500

  Pixel density (dot/m2)

  　　　　　　　　43000　　　　　　 17200

  Peak power consumption〔W/m2〕 700　　　　　　　350

  Average power consumption〔W/m2〕 300　　　　　　　200

  Viewing angle　　　　 150°

  Communication distance (m)　　100 (no relay)

● Indoor monochrome screen

  ★ The display module adopts the products of major manufacturers, and the brightness and luminous consistency of the whole screen are good.

  ★ The system is stable and mature, the installation is simple without debugging, and the failure rate is extremely low.

  ★ According to different requirements, synchronous or asynchronous mode can be used.

  ★ Main technical parameters

  Base color

  Pixel diameter〔mm〕　3.0　　　　 3.75　　　　　 5.00

  Pixel pitch〔mm〕　4.0　　　　 4.75　　　　　 7.62

  Pixel composition　　　　1R　　　　　1R　　　　　　 1R

  Unit panel points (points)

  　　　　　　　 64×32　　　 64×32　　　　 80×32

  Unit panel size (mm)

  　　　　　　　　　　　　　 306×153　　　 612×245

  Unit panel weight (g)

  　　　　　　　　700　　　　900　　　　　　 1500

  Pixel density (dot/m2)

  　　　　　　　 62500　　　 43000　　　　　 17200

  Peak power consumption (W/m2)

  　　　　　　　 500　　　　 350　　　　　　 200

  Average power consumption (W/m2)

  　　　　　　　 350　　　　 200　　　　　　 100

  Viewing angle　　　 150°

  Communication distance (m)　100 (no relay) 　　　　　　　　　　　　　　　　　　　　　　　　

Semi-outdoor screen series

Semi-outdoor screens generally use luminous single lights to form luminous points, which are suitable for environments with high brightness and waterproofness, such as: under eaves, in showcases, halls with strong light, etc. The dot pitch is generally about 7.62mm-10mm; the luminous color is generally single red or red/green dual primary colors; the control method is based on the requirements of use, including asynchronous, synchronous graphics, video, etc.

  ★ Main technical parameters

  Primary color 　 single color/double primary color

  Pixel diameter〔mm〕　　　　 5.00　　　　 5.00

  Pixel pitch〔mm〕　　　　 7.62　　　　 10.00

  Pixel composition　　　　　　　　1R　　　　　1R

  Unit panel points [dot]　　 80×32　　　 32×16

  Unit panel size〔mm〕　　612×245　　　320×160

  Unit panel weight〔g〕　　　1700　　　　 1000

  Pixel density〔dot/m2〕　　　17200　　　　10000

  Peak power consumption〔W/m2〕　　　 400　　　　　300

  Average power consumption〔W/m2〕　　　 250　　　　　200

  Horizontal viewing angle 　　　　　 60-70°

  Vertical viewing angle 　　　　　 45-60°

  Maximum brightness〔cd/m2〕　　　3000　　　　 1800

Outdoor screen series

The outdoor screen area is generally more than ten square meters, and the brightness is high. It can be used in direct sunlight. The viewing distance is generally more than ten meters away. The screen body has the ability to seal and waterproof. According to the control method and display color, it can be divided into the following types:

● Outdoor full color video screen

  ★ The luminous point of the display panel adopts pure color and ultra-high-brightness light-emitting diodes to display

  　 The effect is real and natural.

  ★ The light board is a box structure, which is easy to install and has a flat appearance.

  ★ Using the latest technological level of video control system, the display color is bright and clear.

  ★ Main technical parameters

  Primary color 　RGB (full color) 　　350

  Weight〔Kg/m2〕　　<42　　　　　　　<40

  Horizontal viewing angle 　　　 70°

  Vertical viewing angle　　　45°

  Maximum brightness〔cd/m2〕　7000　　　　　　800

● Outdoor dual-color video screen

  ★ The light board is a box structure, which is easy to install and has a flat appearance.

  ★ Using the latest technological level of video control system, the display color is bright and clear.

  ★ Main technical parameters

  Primary color 　RG (double primary color)

 Pixel pitch (mm)

  　　　　　　11.5　　　　　 16.0　　　　　　 22.0

  Pixel composition　　2R1G　　　　　 2R1G　　　　　　 2R4G

  Unit panel points (points)

  　　　　　 32×16　　　　　32×16　　　　　 32×16

  Unit panel size (mm)

  　　　　　 368×184　　　　512×256　　　　 704×352

  Unit panel weight (g)

  　　　　　 1000　　　　　　1500　　　　　　 2300

  Pixel density (dot/m2)

  　　　　　 7600　　　　　　4096　　　　　　 2048

  Peak power consumption (W/m2)

  　　　　　 800　　　　　　 600　　　　　　　500

  Average power consumption (W/m2)

  　　　　　 300　　　　　　 250　　　　　　　　 150

  Viewing angle 　 70°

  Communication distance (m)　　　　　 100 (no relay)